Risk calculation drill: SLE, ALE, ARO
Quantitative risk questions are pure arithmetic once you know which formula applies. This drill generates fresh numbers each time and shows the calculation after every answer. The calculator below lets you check your own scenario.
The formulas
- SLE (single loss expectancy) = asset value × exposure factor (EF).
- ALE (annualized loss expectancy) = SLE × ARO (annual rate of occurrence).
- Control benefit = ALE before − ALE after − annual cost of the control. A positive result means the control pays for itself.
Worked example. A server worth $100,000 loses 25% of its value in one incident, so the SLE is $25,000. If the incident is expected twice a year, the ALE is $50,000. A control that cuts the rate to 0.5 a year leaves an ALE of $12,500, saving $37,500 a year before its own cost.
The drill modes
The drill has seven question types and a mixed mode. SLE, ALE and the two reverse questions all use the same two formulas, solved for a different unknown:
- SLE: asset value times exposure factor.
- ALE: SLE times ARO.
- ARO: ALE divided by SLE.
- Exposure factor: SLE divided by asset value, entered as a percentage such as 25, not 0.25.
- Asset value: SLE divided by exposure factor.
- ALE with a control: the new ALE after a safeguard lowers the ARO.
- Is the control worth it?: the net annual benefit, entered as a negative number if the control costs more than it saves.
The answer box accepts dollar signs and commas. ARO answers are decimals, for example 0.25 for an incident once every four years. The calculator above the method works the other way: enter your own asset value, exposure factor as a percentage and ARO, and it returns the SLE and ALE, which is useful for checking a question you found elsewhere.
Turning words into numbers
Exam questions hide the inputs in prose. Translate before you calculate:
- “Destroys a quarter of its value” is an exposure factor of 25%, so 0.25 in the formula.
- “Once every four years” is an ARO of 0.25. “Twice a month” is 24.
- “Total loss” means an exposure factor of 100%, so SLE equals the asset value.
Worked example: a control that lowers the rate. A database worth $80,000 would lose 40% of its value in one breach, so the SLE is $32,000. A breach is expected once every two years, so the ARO is 0.5 and the ALE is $16,000. A safeguard cuts the ARO to 0.1, leaving an ALE of $3,200, which is a saving of $12,800 a year. If the safeguard costs $9,000 a year, the net benefit is $12,800 − $9,000 = $3,800 and it pays for itself. If it costs $15,000 a year, the net benefit is −$2,200 and it does not.
Worked example: a control that lowers the damage. Not every control changes how often something happens. Tested backups leave the ARO at 0.5 but cut the exposure factor from 40% to 10%. The SLE becomes $80,000 × 0.10 = $8,000 and the ALE becomes $4,000. The saving is $16,000 − $4,000 = $12,000 a year.
Worked example: working backwards. An ALE of $10,000 with an ARO of 0.25 means the SLE is $40,000 (10,000 ÷ 0.25). If the asset is worth $200,000, the exposure factor is 40,000 ÷ 200,000 = 20%.
Common mistakes
- Mixing percent and decimal. In the formula use 0.25; in the calculator and in the drill’s exposure-factor answers type 25.
- Stopping at the SLE when the question asks for the annual figure. If a frequency appears, the answer is almost always the ALE.
- Comparing the control’s cost with the new ALE instead of with the reduction in ALE. The test is ALE before minus ALE after, compared with the annual cost.
- Forgetting that a rare event has an ARO below 1.
- Treating a negative benefit as a failure of the arithmetic. A control that costs more than the loss it prevents is a valid answer, and the exam may expect you to reject it.
Where this is tested
Security+ SY0-801 expects you to know SLE, ALE and ARO, and to recognise the formula when the numbers are given in words; the formulas appear in the program management guide, the cheat sheet and the practice test. The arithmetic is only half of it. The other half is knowing that quantitative figures depend on estimates, which is why many organisations also use qualitative ratings, as the qualitative vs quantitative guide explains.
The difference between this and qualitative scoring is explained in qualitative vs quantitative risk. Written practice is in the risk practice questions, and the topic appears in Security+ SY0-801.